Mitsubishi Electric GT14 Especificações descarregar pdf (Página 1)

This manual confers no industrial property rights or any rights of any other kind,

nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be

held responsible for any problems involving industrial property rights which may

occur as a result of using the contents noted in this manual.

Warranty

Mitsubishi will not be held liable for damage caused by factors found not to be

the cause of Mitsubishi; opportunity loss or lost profits caused by faults in the

Mitsubishi products; damage, secondary damage, accident compensation

caused by special factors unpredictable by Mitsubishi; damages to products

other than Mitsubishi products; and to other duties.

For safe use

This product has been manufactured as a general-purpose part for general

industries, and has not been designed or manufactured to be incorporated in

a device or system used in purposes related to human life.

Before using the product for special purposes such as nuclear power, electric

power, aerospace, medicine or passenger movement vehicles, consult with

Mitsubishi Electric.

This product has been manufactured under strict quality control. However

when installing the product where major accidents or losses could occur if the

product fails, install appropriate backup or failsafe functions in the system.

•

HEAD OFFICE

HIMEJI WORKS

: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310,

JAPAN

: 840, CHIYODA CHO, HIMEJI, JAPAN

Side

JAPANESE ENGLISH

JY997D44401C

Safety Precaution

(Read these precautions before using.)

Before using this product, please read this manual and the relevant manuals

introduced in this manual carefully and pay full attention to safety to handle the

product correctly.

The precautions given in this manual are concerned with this product.

In this manual, the safety precautions are ranked as and .

Depending on circumstances, procedures indicated by may also be

linked to serious results.

In any case, it is important to follow the directions for usage.

Indicates that incorrect handling may cause hazardous

conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous

conditions, resulting in medium or slight personal injury

or physical damage.

MOUNTING

PRECAUTIONS

• Use the RS-232/485 signal conversion adapter in the environment that

satisfies the general specifications described in this manual. Not doing so can

cause an electric shock, fire, malfunction or product damage or deterioration.

OPERATION

PRECAUTIONS

• Power OFF the GOT, and then connect securely the RS-232/485 signal

conversion adapter to the specified connector in the GOT.

Poor connection may cause malfunction.

• Remove static electricity charged in the human body before handling the RS-

232/485 signal conversion adapter.

Static electricity may damage the stored data and elements.

DISPOSAL PRECAUTIONS

• When disposing of the product, handle it as industrial waste.

Related Manuals

The following manuals are relevant to this product. When these loose manuals are

required please consult with our local distributor.

1. Overview

The GT14-RS2T4-9P RS-232/485 signal conversion adapter (hereinafter referred to as

"RS-232/485 signal conversion adapter") converts the RS-232 communication

interface of the GOT into the RS-485 communication interface.

Applicable GOT units are shown below.

2. Part Names and External Dimensions

Manual name

Manual

Number

(Model Code)

Contents

GT14 User's Manual

JY997D44801

(09R823)

Describes the GT14 hardware-relevant

content such as part names, external

dimensions, mounting, wiring,

specifications, and introduction to option

devices. (sold separately)

GOT1000 Series

Connection Manual

(Mitsubishi

Products) for GT

Works3

SH-080868ENG

(1D7MC2)

Describes system configurations of the

connection method applicable to GOT1000

series and cable creation method.

(sold separately)

GOT1000 Series

Connection Manual

(Non-Mitsubishi

Products 1) for GT

Works3

SH-080869ENG

(1D7MC3)

Describes system configurations of the

connection method applicable to GOT1000

series and cable creation method.

(sold separately)

GOT1000 Series

Connection Manual

(Non-Mitsubishi

Products 2) for GT

Works3

SH-080870ENG

(1D7MC4)

Describes system configurations of the

connection method applicable to GOT1000

series and cable creation method.

(sold separately)

GOT1000 Series

Connection Manual

(Microcomputer,

MODBUS Products,

Peripherals) for GT

Works3

SH-080871ENG

(1D7MC5)

Describes system configurations of the

connection method applicable to GOT1000

series and cable creation method.

(sold separately)

GOT

GT1455-QTBDE, GT1450-QLBDE, GT1455-QTBD, GT1450-QLBD

No. Name Contents

1) RS-485 terminal block 5-pin (Fixed type)

2) GOT connector D-Sub 9-pin female

3) Fixing screw hole M3 tapping screws

(accessory)

1pair/2pair/

Terminating resistor setting

switch

• 1Pair/2Pair

• Terminating resistor (110Ω, OPEN, 330Ω)

(At factory shipment: 2Pair, Terminating

resistor 330Ω)

48 (1.89")

36 (1.42")

(0.67")

Unit: mm (inch)

3. Specifications

3.1 General Specifications

(Other specifications are the same as the GT14 main unit.)

4. Pin assignment

5. 1pair/2pair/Terminating resistor setting switch

• Set "1 pair" or "2 pairs" using the switches Nos. 1 and 2, and set the terminating

resistor value using the switches Nos. 3 to 6.

• Do not manipulate the setting switches while power is supplied to the RS-232/485

signal conversion adapter.

6. Wiring

• For the detail, refer to GOT1000 Series Connection Manual.

Item Specifications

Operating ambient

temperature

0 to 55°C

Storage ambient

temperature

-20 to 60°C

Operating/Storage

ambient humidity

10 to 90% RH, non-condensing

Operating atmosphere

Must be free of lamp black, corrosive gas, flammable gas,

or excessive amount of electro conductive dust particles

and must not be exposed to direct sunlight (during

operation and storage).

Power consumption 0.5W or less (100mA/5VDC), supplied from the GOT

Pin No. Signal name

1SG

2SDB

3SDA

4RDB

5RDA

Setting

item

Set

value

Switch No.

1 2 3 4 5 6

1pair/2pair

1pair ON ON - - - OFF

2pair OFF OFF - - - OFF

Terminating

resistor

110Ω - - ON OFF OFF OFF

OPEN - - OFFOFFOFFOFF

330Ω --OFFONONOFF

Format

Terminating

resistor

Switch No.

1 2 3 4 5 6

1pair

110 Ω ON ON ON OFF OFF OFF

OPEN ON ON OFF OFF OFF OFF

2pair

330Ω OFF OFF OFF ON ON OFF

OPEN OFFOFFOFFOFFOFFOFF

Cable jacket to remove 5mm (0.19”)

Tightening torque 0.22 to 0.25 N•m

Recommended Tool (Screwdriver) SZS 0.4×2.5 (Phoenix Contact Inc.)

12345

Tightening torque: 0.22 to 0.25N•m

• Refer to the table below for applicable wire sizes.

7. Installation

1) Turn off the GOT power.

2) Connect the RS-232/485 signal

conversion adapter to the RS-232

interface on the GOT.

3) Fix the RS-232/485 signal conversion

adapter to the GOT using the provided

M3 tapping screws.

Tightening torque: 0.3 to 0.6 N•m

8. Cautions on use of RS-232/485 signal conversion

adapter

• When using the RS-232/485 signal conversion adapter, select [Communication

setting] → [5V power supply] → [YES] on the utility screen in the GT14 main

unit.

For details, refer to the following.

→ GT14 User’s Manual (8.2 Utility Function List)

• The GT14 main unit whose hardware version is B or later supports the setting

whether or not 5V power is supplied.

In the hardware version A, the setting operation about 5V power supply is

invalid because 5V power is always supplied.

• When using the RS-232/485 signal conversion adapter, make sure that the

core OS version is V05.28.00AP or later and the standard monitor OS version

is V05.28.00 or later in the GT14 main unit.

For details, refer to the following.

→ GT14 User’s Manual (12.1.2 OS version confirmation)

No. of wire per

terminal

Electrical wire size

Solid wire Stranded wire

Ferrules with

plastic sleeve

0.14 to 1.5mm

AWG26 to AWG16

0.14 to 1.0mm

AWG26 to AWG16

0.25 to 0.5 mm

AWG24 to AWG20

0.14 to 0.5mm

AWG26 to AWG20

0.14 to 0.2mm

AWG26 to AWG24

GT14-RS2T4-9P

RS-232/485 Signal Conversion Adapter

User's Manual

This manual describes the part names, external dimensions, and specifications

of the product. Before use, read this manual and manuals of relevant products

fully to acquire proficiency in handling and operating the product. Make sure to

learn all the product information, safety information, and precautions.

And, store this manual in a safe place so that you can take it out and read it

whenever necessary. Always forward it to the end user.

Registration

The company name and the product name to be described in this manual are

the registered trademarks or trademarks of each company.

Effective Jan. 2012

Specifications are subject to change without notice.

Manual Number JY997D44401

Revision C

Date Jan. 2012

JY997D44401C 1

Resumo do Conteúdo

Página 1 - JY997D44401C

This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corpora

Mais documentos para não Mitsubishi Electric GT14

Para ver o documento Mitsubishi Electric GT14 Manual do Utilizador

Mitsubishi Electric GT14 Manual do Utilizador (4 páginas)

Comentários a estes Manuais

Sem comentários

Mitsubishi Electric GT14 Especificações Página 1

Consulte online ou descarregue Especificações para não Mitsubishi Electric GT14. Mitsubishi Electric GT14 Specifications Manual do Utilizador

Resumo do Conteúdo

Mais documentos para não Mitsubishi Electric GT14

Comentários a estes Manuais

Mitsubishi Electric GT14 Especificações Página 1

Consulte online ou descarregue Especificações para não Mitsubishi Electric GT14. Mitsubishi Electric GT14 Specifications Manual do Utilizador

Resumo do Conteúdo

Mais documentos para não Mitsubishi Electric GT14

Comentários a estes Manuais

Manuais e produtos relacionados com não Mitsubishi Electric GT14